SHE150 resin is a High Density Polyethylene (HDPE) specifically designed for the monofilament extrusion process. It offers a well-balanced combination of processability, spinnability, and knotting strength, while maintaining minimal gels. Additionally, it contains processing aid and oxidant additives. This grade has a minimum biobased carbon content of 94%, as determined by ASTM D6866. The resin can also be blended with LLDPE to enhance the stiffness of blown films.

Polymer NameHigh Density Polyethylene (HDPE), High Density Polyethylene (HDPE) Compound

Processing MethodsBlown Film Extrusion, Cast Film Extrusion, Compression Molding, Extrusion, Fibers Extrusion, Film Extrusion, Monofilament Extrusion

Additives IncludedAntioxidant, Processing Aid

Melt Flow Index1.0 - 1.0 g/10 min

Ask Braskem America Questions

Abbey Kugel avatarJerry O'Grady avatarKirstie Conkey avatar

Enhanced TDS

Identification & Functionality

Additives Included
Plastics & Elastomers Functions
Technologies

Features & Benefits

Applications & Uses

Industries
Compatible Polymers & Resins

Properties

Typical Properties
ValueUnitsTest Method / Conditions
C14 Contentmin. 94%ASTM D 6866
Control Properties
ValueUnitsTest Method / Conditions
Melt Flow Rate (at 190°C, 2.16kg)1g/10 minASTM D1238
Density0.948g/cm³ASTM D792
Typical Properties - Plaque Properties
ValueUnitsTest Method / Conditions
Tensile Strength (at Yield) ᵃ28MPaASTM D638
Tensile Strength (at Break) ᵃ40MPaASTM D638
Flexural Modulus (1% Secant) ᵇ1280MPaASTM D2240
Hardness ᶜ62ASTM D2240
Deflection Temperature Under Load (at 0.455 MPa) ᵇ76°CASTM D648
Vicat Softening Temperature (at 10 N) ᵇ128°CASTM D1525
Note

Typical Properties - Plaque Properties:

  • Test specimens from compression molded plaque according to ASTM D4703. Plaque Thickness: a) 2mm. b) 3mm c) 6mm. NB = No break

Regulatory & Compliance

Quality Standards