SBF0323HC

1 of 32 products in this brand

SBF0323HC is a high molecular weight grade produced using high-pressure technology. This product is specifically designed to create films with outstanding mechanical and optical properties. Moreover, it is additives-free and has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's REACH site

Polymer Name: Low Density Polyethylene (LDPE)

Processing Methods: Blow Molding, Blown Film Extrusion, Cast Film Extrusion, Extrusion, Extrusion Blow Molding (EBM), Film Extrusion, Profile Extrusion, Tubing Extrusion

Melt Flow Index:: 0.32 g/10 min

Technical Data Sheet Safety Data Sheet Regulatory Information Sheet

Ask Braskem America Questions

TypeDocument Name

View All Documents

Enhanced TDS

Identification & Functionality

Chemical Family: Polyethylenes,
Polyolefins
Polymer Name: Low Density Polyethylene (LDPE)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Basic Thermoplastics
Polyolefins

Features & Benefits

Labeling Claims: Additive-free,
Azo Colorants-free,
Azo Dyes-free,
Bio-based,
Carbon Black-free,
Dye-free,
Low Carbon Footprint (PCF),
Pigment-free,
Recyclable,
Sustainable,
Sustainable Polyethylene
Materials Features: Good Mechanical Properties,
Good Optical Properties,
High Molecular Weight,
Low Carbon Content,
Renewable Resource Content

Applications & Uses

Industries: Films,
Packaging
Applications: Films — Blown Films
Films — Cast Films
Packaging — Cosmetic Packaging
Packaging — Food & Beverage Packaging
Packaging — Industrial & Transport Packaging
Compatible Polymers & Resins: High-Density Polyethylene (HDPE)
Plastics & Elastomers End Uses: Agricultural Film,
Blown Films,
Cast Films,
Co-extruded Film,
Cosmetic Packaging,
Film,
Flexible Packaging,
Food Packaging,
Food Tubes,
Heat Shrink Film,
Industrial Liners,
Industrial Sacks,
Rigid Packaging,
Sqeeze Packaging,
Tube Packaging,
Tubes
Plastics & Elastomers Processing Methods: Blow Molding,
Blown Film Extrusion,
Cast Film Extrusion,
Extrusion,
Extrusion Blow Molding (EBM),
Film Extrusion,
Profile Extrusion,
Tubing Extrusion

Properties

Physical Form

Soluble In

Typical Properties


	Value	Units	Test Method / Conditions
C14 Content	min. 95	%	ASTM D 6866

Blown Film Properties


	Value	Units	Test Method / Conditions
Tensile Strength (at Break, MD) ¹	20	MPa	ASTM D882
Tensile Strength (at Break, TD) ¹	20	MPa	ASTM D882
Elongation (at Break, MD) ¹	390	%	ASTM D882
Elongation (at Break, TD) ¹	930	%	ASTM D882
Dart Drop Impact Strength ¹	290	g/F50	ASTM D1709
Elmendorf Tear Strength (TD) ¹	270	gF	ASTM D1922
Haze ¹	10	%	ASTM D1003
Gloss (Angle 60°) ¹	92	%	ASTM D2457

Control Properties


	Value	Units	Test Method / Conditions
Melt Flow Rate (at 190°C, 2.16kg)	0.32	g/10 min	ASTM D1238
Density	0.923	g/cm³	ASTM D1505

Note

¹ 38 μm Film Gage, obtained in 75 mm extruder, with 2:1 BUR. die gap 1.0 mm, (MD: Machine direction; TD: Transversal direction).
² ND: Not Determined.

Regulatory & Compliance

Certifications & Compliance: ANVISA Resolution RDC No. 105/1999,
ANVISA Resolution RDC No. 326/2019,
ANVISA Resolution RDC No. 56/2012,
ANVISA Resolution RDC No. 91/2001,
Comprehensive Environmental Response, Compensations & Liability Act (CERCLA),
Directive 1333/2008/EC,
Directive 2000/53/EC,
EC No. 2023/2006,
EC No.1907/2006,
EU 2019/904,
MERCOSUR Resolution GMC No. 02/12,
MERCOSUR Resolution GMC No. 03/92,
MERCOSUR Resolution GMC No. 39/19,
MERCOSUR Resolution GMC No. 56/92,
Regulation (EC) No. 1333/2008,
Regulation (EC) No. 1334/2008,
Regulation (EC) No. 282/2008,
Regulation (EU) No. 10/2011 (PIM),
Regulation (EU) No. 1935/2004,
Regulation (EU) No. 2019/1021,
Regulation (EU) No. 2023/1627
Chemical Inventories: AICS (Australia),
DSL (Canada),
EINECS (EU),
ENCS (Japan),
IECSC (China),
ISHL (Japan),
KECI (Korea),
NZIoC (New Zealand),
PICCS (Phillipines),
TCSI (Taiwan),
TECI (Thailand),
TSCA (USA)
Quality Standards: In Preview