Braskem America HDI0861U1

Braskem HDI0861U1 is a high density polyethylene (HDPE) with a narrow molecular weight distribution. Parts fabricated from this material exhibit a glossy surface finish and have good impact strength and rigidity. This resin has UV stabilizers.

Polymer NameHigh Density Polyethylene (HDPE)

Processing MethodsInjection Molding

Additives IncludedUV Stabilizer

Melt Flow Index8.5 - 8.5 g/10 min

Ask Braskem America Questions

Abbey Kugel avatarJerry O'Grady avatarKirstie Conkey avatar

Enhanced TDS

Identification & Functionality

Additives Included
Plastics & Elastomers Functions

Features & Benefits

Applications & Uses

Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods


Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Elasticity Modulus (Secant 1%)1470MPaASTM D-638
Environmental Stress Cracking Resistance(100% Igepal, Condition B)3hASTM D-1693
Flexural Modulus (Secant 1%)1490MPaASTM D-790
Hardness65Shore DASTM D-2240
Heat Deflection Temperature (0.455 Mpa)75°CASTM D-648
Izod Impact Strength (at 23°C)45J/mASTM D-256/A
Tensile Strength at Break21MPaASTM D-638
Tensile Strength at Yield30MPaASTM D-638
Vicat Softening Point (10 N)130°CASTM D-1525
Strain at Yield6%ASTM D638
Strain at Break880%ASTM D638
Control Properties
ValueUnitsTest Method / Conditions
Density0.961g/cm³ASTM D-792
Melt Flow Rate (190°C/2.16Kg)8.5g/10 minASTM D-1238

Regulatory & Compliance

Chemical Inventories